Have you ever been flying a drone, and had problems with it losing signal and not being able to get it back? Maybe your drone just randomly decided it was going to fly back to home base, and you are not sure if you pushed a button or what you did to make it return home. If you fly very often, you have probably had this happen at least once while you were flying.
So what do you do if your drone loses signal?
If your drone is losing signal, you will want to make sure you know if your drone is set up to return to home, or stay in the same location until signal is found. If you do not have a drone that has these options, you may want to invest in them as other drones may simply fall out of the sky if the signal is lost.
If your drone continues to lose signal, and you are not sure what to do, you will want to make sure the batteries are always fully charged. No matter what happens, you should not panic, and you should simply try to regain signal as the drone moves back closer to you. If you have returned home set up on the drone, you can even simply wait for the drone to come back and land right where it took off from.
If you are looking for a drone that will return to home if a connection is lost, you can find them by clicking here.
What happens when your drone loses signal?
Your drone shall consequently drop its flight mission if it loses signal association for a couple of seconds. At that point it will act according to the Remote-Controller-Signal-Lost activity. If this happens, it will go to however it is set up. Most drones are automatically set to return to home if it ever loses signal.
You can turn off return to home though by squeezing the RTH button from the remote controller as soon as your drone gets a signal once more. The automaton will at that point float in the sky and sit tight for your next order.
As mentioned previously, return to home is set by default for the remote controller signal lost activity. Yet, it very well may be set to different values. For example, you can set it to go back to the ground or drift up in the sky even after the signal is lost. To set this up, you will need to go to the advanced settings segment of your DJI drone.
Furthermore, for the “On Signal Loss” alternative in “Altizure” application, you can likewise set it as “Continue Mission.” If you do this, it will proceed with the mission you have last commanded. All things considered, your drone won’t drop the flight in any event, not even in the case of losing the signal from its remote controller.
How can I lose my drone forever?
It is possible to lose your drone forever, or at least a very long time if:
- The “Continue Mission on Signal Loss” setting is enabled.
- Your aircraft lost its connection for a long period of time.
- The Battery falls underneath “Critically Low Battery Warning” level when the mission has not yet been completed (you can discover the “Critically Low Battery Warning” threshold which is found in DJI Go).
The previously mentioned situations are major problems for the following reasons:
- The DJI firmware will command the drone to land down on the ground in case its battery falls beneath “Critically Low Battery Warning” level.
- When a mission is not finished and not even canceled, the DJI firmware does not allow the activation of Return-To-Home as long as the battery is not low.
- The drone is not able to get the Return-To-Home signal from the application nor the remote controller if it gets disconnected.
Why might the drone lose signal?
There are a lot of cases where the drone you have may get a lost signal or actually a lost connection to the flight application “Skycatch”. The majority of those times though, the drone shall directly fly back to home taking into consideration what type of connection loss it received and the length of this loss.
A couple of frequently happening scenarios are:
- The application will lose its connection or gets turned off because of a bad USB cord or a problem in the software (the application or your mobile suddenly freezes).
If this happens, the aircraft keeps on performing the originally planned mission and is going to return to home as soon as its battery falls to 25%.
- A loss of signal occurs between the drone and its remote controller. This happens because of distance issues, (in case of the drone exceeding the acceptable distance from the remote controller signal) or due to some magnetic intervention coming from the areas all around.
- Another reason for signal loss is when the GPS signal connected to the drone gets lost. If This happens, the drone lands down to the ground because it won’t be able to discover any location when it lacks GPS connection.
Drone Controller Out of Range
If the drone flies out of range of the controller, it implies that it can’t be controlled. If this happens, It will tumble from the sky, or get lost. This used to be the situation with more seasoned tech drones and some modern ones of today.
In any case, current drones, particularly those made by DJI, have an element that keeps this from happening. The cutting-edge ramble has the home GPS position put away in the memory; it does so when it takes off. In the event that the drone veers off kilter and outside the controller’s WiFi zone, the drone flyer gets a warning on the associated gadget (telephone or tablet). Simultaneously, the drone endeavors to remember the way back till it finds the signal.
Additionally, the drone contains the “Return to Home” setting, which has a function that gets activated in cases when:
- It gets manually activated by the flyer from its controller
- Battery level falls down and the drone possesses insufficient power or time to go back home
The good news is that present day drones won’t drop from the sky. At the point when basic mistakes occur, the drones will figure out how to land any place they are in in a safe manner.
Drone Camera Out of Range
The expert drones (the ones that are progressively costly) have a fly back home choice.
The manner in which it works is:
- Before departing, the drone saves the GPS location of “home base”. This is fundamentally where the administrator is.
- In the drone controller application, you can set the settings of what it ought to do in the event that it leaves acceptable range or loses signal. Contingent upon the area you set it so it moves to an assigned height as to stay away from any snags that may stand out.
- The drone climbs and afterward flies straight back towards home base where the operator is located.
- When the drone comes back, the administrator can take control again and keep flying it. On the off chance that for reasons unknown the administrator can’t take control (remote comes up short on power) the drone will proceed and will land basically in the exact spot where it took off.
Problems with Drone Signal Loss
You may get a short range between the controller and the camera on some drones though. Regularly the camera’s range is shorter than that of the drone, yet this can be opposite for some drones. On the off chance that the camera signal runs out before the drone loses range, at that point you’ll lose video, yet it will keep on flying. On the off chance that you can see the drone, at that point you can fly it and ideally fly it into the camera’s range. I
On the off chance that you’re stressed over this, it is best to search for a return-to-base drones that has the capacity to fly itself back to the beginning position it took off from. Noone wants to lose a drone, and owning a drone that you know is going to come back and land right where it took off from is a great way to make sure no matter what happens, that you never lose a drone.